DGC5

The PolyGard®1 Series is sunsetting and superseded by our next-generation PolyGard®2 — product availability is significantly limited.

Multi-Point Digital Gas Detection and Control System

Wall mounted, microprocessor-based, multi-point, RS-485 digital communicating system for various gas, temperature and humidity detection, control and alarm.

About This Product

Optional data logging function provides internal recording of time/date stamped sensor values, alarms, and system errors. This data is highly valuable during system commissioning and with periodic analysis, ensures long-term system performance.

To control and alarm upon the presence of any toxic, combustible and refrigerant gases. A combination of the RS-485 communicating DT5 series and analog AT series, or other 4-20 mA transmitters piggy-backed via a digital DT5 transmitter, can be connected to the control unit. The controller interfaces via binary outputs, 4-20 mA signals, and/or optional BACnet or Modbus port with any compatible electronic control, DDC/PLC control or automation system.

Benefits

Continuous monitoring
RS-485 digital bus, serial communication
Up to (98) remote RS-485 digital communicating transmitter inputs; or combination of (48) RS-485 digital & (48) 4-20 mA analog transmitters
Four (4) digital inputs
Up to (5) built-in or remote
RS-485 relay/AO modules
One (1) 24 VDC supply output
Built-in horn
Accepts combination of toxic or combustible gases, refrigerants, temperature or humidity sensor inputs
Optional BACnet or Modbus
Liquid Crystal Display (LCD)
LED status indicators
Keypad user interface
Simple menu-driven programming
Modular technology
Overload & short-circuit protected
Resettable breaker
NEMA 4X enclosure
Easy maintenance
Optional data, alarm, and fault logging